• Our ADAE P1 Dental porcelain furnace can realize the functions of glass-ceramic crystallization, glazing, porcelain baking,porcelain mending, dyeing, ring burning and so on.
• It is small and compact, occupying a small space, and it is very easy to place and store. It is especially suitable for dental hospitals, clinics and denture studios that are clean, tidy and have space requirements.
• It can be used with chair-side CNC, and almost all tasks can be completed in a very small space. In addition,it is extremely convenient to carry.
• In extreme cases, it can be started by using 12V battery power supply with the driver. It is not afraid of power failure and other interference, and does not affect the operation of temporary porcelain mending, dyeing and so on.

1. CNC plus the following steps -- > glass ceramic crystallization.
2. The following steps after CNC processing -- > glass ceramics, zirconia dyeing. glazed.
3. CNC processing glass ceramics, zirconia -- > shape porcelain
4. CNC machining defective restorations -- > porcelain repair
5. Firing porcelain embedded ring, small metal embedded ring, 100g ring at most two.
6. Rework the denture --> modify the color, fill the porcelain, re-glaze.

1. Hyperbolic ceramic furnace function, the program can be set to single curve mode or hyperbolic mode, hyperbolic mode provides a complete crystallization process for glass-ceramic crystallization.
2. Voice prompt function.
3. High quality temperature automatic adjustment function, to ensure that the actual temperature error within + /- 1 degrees.
4. Portable for easy transfer and storage.
5. Quartz spiral furnace.
6. Automatic temperature calibration before each baking procedure.
7. The built-in vacuum pump can reach - 90kpa at most.
8. True color touch screen, easy to operate.
9. 99 custom programs and built-in programs.
10. Automatic detection of furnace door closing before heating.

1. Volume (length, width and height): 18 * 20 * 35cm
2. Furnace size: 75 * 45 * 90mm
3. Maximum temperature: 1100 °C
4. Power: 850W
5. Maximum heating rate: 100°C / min
6. Maximum vacuum: - 92kpa
7. Vacuum level:1-101%
8. Power Supply：
   ●Voltage：100-120V 50/60HZ 230V 50/60HZ
   ●Current：14.5A/110V；7.0A/230V
   ●Power：Maximum 1500W（Including vacuum pump）

1. Firing pan*1pc
2. Spare wrench for furnace door*1pc
3. Connection cable for the mains power supply*1pc
4. Instruction*1pc
5. Burning rack*1pc

One year.